Switch Button: Without (DON’T NEED TO PRESS!) Product Size: 4*4.4*6.8 inches
Housing Material: ABS + PC
Power Source: Battery-Powered
Light Colors: Cold White
Sensor Mode: Motion Sensor & Light Sensor
Sensor Angle: 90°~120°
Installation Height: 3~5 meter (10~16 ft)
Sensitivity Distance: 5~7 meter (16~26 ft)
Bright Source: 4*2W LED
Luminous Flux: 600lm
IP Rating: IP65
Power Source: 4 * D-cell 1.5V Battery (Not Inclucded)
Operating Temperature: -5℃~60℃
1 x Discoball 4*LED Sensor Spotlight (Model: 57789)
3 x Screws
3 x Anchors
1 x User Manual
1. No Switch Button, No operation required!! Don’t Press & Avoid to Press the Middle Motion Sensor Cover!!!
It might damaged if cover were pressed by hard, and cause the products not work.
2. Please make sure your 4 D-Cell Batteries were placed correctly base on polarity anode and cathode.
3. Lights would not turn on if there is enough brightness, such as daytime. Testing at dim environment if you want.
Customers Service: for any question, just feel free to contact with us, we are here to help always.
- [ Easy Installation: ] Wireless, batteries powered, can be mounted anywhere you want. Installation angle could be adjusted base on specific use places. (Especially suitable for those outdoor place without convenient DC power or no Solar energy, ideal for indoor home use as well.) Installation Height: 3~5 meter (10~16 ft). Detect Distance: 5~7 meter (16~26 ft), actual data might differ from different environment. NOTICE: Please make sure your 4 D-Cell Batteries were placed correctly.
- [ Ultra-Bright: ] Super Bright quality 4x2W LED beads, max light output 600 lumens. Turn night into day and use only 4 D Cell batteries. Spotlight & Flashlight, can be mounted on the wall or use as a flashlight. Light effect NOTICE: As to the specific light irradiation effect range would be differ from different installation height, picture shows in this listing is just a function display. Please don’t judge the light irradiation effect subjectively. Thanks for your understanding.
- [ Energy Saving: ] Powered by 4 D-cell alkaline batteries for up to 3,600 activations (lasts 20 seconds per trigger. )[The first lasting time would be a bit longer, about 30s, and then return to normal.] Wireless spotlight goes only in darkness to conserve battery life. TIPS: Lights would not turn on if there is enough brightness, you could testing the function whether work well in a dim environment. Please read all the manual carefully before install, it would be save your time and effort.
- [ Durable: ] Excellent resistance to heat, impacts, low temperatures and chemicals. Ingress protection level IP65, works in most weather conditions. Safeguard your home or business both inside and out with our Motion Sensor LED light. Batteries polarity have to be placed correctly base on anode and cathode, or it wouldn’t work. Use only new alkaline D-cell batteries with 1.5V rating. Do not mix old and new batteries. If your light couldn’t turn on, it means that it is time to replace batteries.
- [ Smart PIR Motion Sensor: ] Intelligent lighting control system, turn on automatically when motion is detected in darkness environment only, wouldn’t turn on at daytime visible light; It would shut off automatically after 30 seconds if no motion is detected. IMPORTANT: (No Switch Button, No operation required!! Don’t Press & Avoid to Press the Middle Motion Sensor Cover!!! It might damaged if cover were pressed by hard, and cause the products not work.(100% testing before packing and shipping.)