Automatic Energy Saving Mode:
The solar motion light automatically charges in daylight and keeps standby mode.
Human induction + light sensor + dim mode. In the absence of light, when someone or something moving enters its sensing zone, it will be triggered and turned on to bright mode, and then becomes dim circularly until the trigger leaves.
Polycrystalline Solar Panel: 5.5V 0.9W 17% efficiency
Li-ion Battery: 3.7V 2200 MAH
Bulb: LED light source
LED number: 16PCS
LED Power: 2.0W 6500K 250Lumens
Light color: White
Night sensor: ＜10lux
Motion angle and distance: 120Degree, 5m
High light delay: 10 seconds
1* Motion Sensor Light
2* Expansion Pillar-hinges
1* English User Manual
1. Please tear the film layer on the surface of the solar panel and then full charge the device before first use.(If the LED lights blink repeatedly)
2. If there is no good sunlight in 3 months, the battery may be out of power, so you have to charge it by bright sunlight, when it’s fully charged, please use Supplied Key Pin to unlock the device and lighting system, otherwise, it can’t work anymore.
3. If the light is blink, it means the power is very low, you have to charge it by sunlight soon, otherwise, the device will stop working soon.
- Ultra-thin 16 LED Solar Lamp, motion sensor automatically turns the light on/off; Sunlight sensitive, only works at night or in low light conditions
- Built-in 2200 MAH lithium battery, recharged by sunlight and store power for overnight lighting, up to 12h lighting time with a single charge. The light can be also recharged without no good sunlight or in winter.
- Energy-saving and environmental protection, low power LED light.
- Concealed power switch behind the product, waterproof and practical, convenient and simple to operate.With inclining design, water can’t stay on the light.
- Easy installation, no wiring required, just screwing it into any hard surface or hanging it in any surface with hook where there is sunlight