The sensitive motion sensor does not light up, but as soon as you are within 5-12 meters perception distance it does light up.
If you leave the radius, the light is switched off in 90 seconds.
If your lamp is positioned a bit far from the solar panel, 2.3 meters is not long enough, you can extend the line (3 meters).
According to your needs, make sure that suitable for both inside and outside.
Charged by sunlight and once fully charged, provide continuous light for up to 8 hours and over 80x induction lighting at night.
With IP44 waterproof and heat-resistant structure and high-quality, environmentally friendly plastic housing, it is weather resistant.
Sensor-controlled flat beam with 10 powerful LEDs and motion detector
Separate solar panel with approx. 2.3 m connection cable for optimal location positioning.
Selector switch for Off (left), Continuous light (centre, AUTO) or motion detector mode (right, PIR).
☞ Technical data:
Light colour: White.
LED quantity: 10.
Luminous flux: 150 lumens.
Energy rating: 2.0 W.
Case Material: Plastic.
Cable: approx. 2.30 meters.
☞ Two modes:
Continuous light mode.
☞ Motion sensor:
Range approx. 5-12 m
3 x 600 mAh/1.2 V Ni-MH battery (replaceable).
☞ Box contents:
1 x LED Solar Light with motion sensor.
1 x Solar Panel.
1 x mounting material set.
1x user manual (cannot guarantee instructions are in English).
- ✔ Suitable for indoor or outdoor: outdoor for your balcony, garden, garage, cellar access, patio, driveway , terrace etc;indoor for your sunny room.
- ✔ High luminous efficiency: Effectively convert solar energy into electricity, after full charged can work for 8 hours.
- ✔ Sensitive motion sensor: When entering 5-12m range of distance, it will emit bright light and last for 90 seconds.
- ✔ High water residence: With IP44 waterproof and heat-resistant structure and high-quality, it is weather resistant.
- ✔ Environmentally friendly: 10 LED Brighter light, plastic housing for environmental protection.